Polonik Marina V.

Degree: PhD (Phys.-Math.)

Position: senior scientific employee

Department: Лаборатория механики деформируемого твёрдого тела (№51)

Room: 529

Internal Phone: 2-57

Email: polonic@iacp.dvo.ru

• 2016. M.V. Polonik, E.E. Rogachev, Steady Flow of Incompressible Elastic-Plastic Medium in a Spherical Matrix at Variable Loads, Key Engineering Materials. Vol. 685, pp. 32-36, Mar. 2016. doi:10.4028/www.scientific.net/KEM.685.32
• 2012.
• 2014. E.V. Murashkin, M. Polonik, Determination of a Loading Pressure in the Metal Forming by the Given Movements, Advanced Materials Research, 842 (2014) 494-499. DOI: 10.4028/www.scientific.net/AMR.842.494
• 2014. M.V. Polonik, E.E. Rogachev, A Decrease of Residual Stresses in the Elastic-Plastic-Creep Medium at Temperature Influence, Advanced Materials Research, 1040 (2014) 870-875. DOI:10.4028/www.scientific.net/AMR.1040.870.
• 2014.
• 2019. Polonik M.V. . Makarova N.V.. Mantsybora A.A. Chislennoye modelirovaniye abrazivnogo iznosa tsementnykh zernistykh kompozitov s ispolzovaniyem eksperimentalnykh dannykh // Vestnik Inzhenernoy shkoly DVFU. Rossiya. Vladivostok: DVFU. 2019 №4. S.3-11.
• 2012. ISBN 978-1-880653-94–4 (Set); ISSN 1098-6189 (Set).
• 2016. M.V. Polonik, E.E. Rogachev, Mathematical Modeling of the Technological Process of Residual Stresses Relief in Metals at Low-Temperature Exposure, Key Engineering Materials. Vol. 685, pp. 27-31, Mar. 2016. doi:10.4028/www.scientific.net/KEM.685.27
• 2012.
• 2014.
• 2021. Kulchin, Y.N., Gribova, V.V., Timchenko, V.A., Polonik, M.V., Pivovarov, D.S., Yatsko, D.S., Nikiforov, P.A., Nikitin, A.I. Design methodology for laser additive process of lattice periodic structure formation on the surface of an aluminum alloy plate // Automation in Industry, №10, 2021, pp. 27-36. DOI: 10.25728/avtprom.2021.10.04. (in Russian).
• 2016.
• 2013. E.V. Murashkin, M.V. Polonik, Development of approaches to the creep process modeling under large deformations, Applied Mechanics and Materials. 249-250 (2013) 833-837. DOI:10.4028/www.scientific.net/AMM.249-250.833.
• 2013. N.V. Makarova, M.V. Polonik, Abrasion Wear of Heterogeneous Materials, Applied Mechanics and Materials, 248 (2013) 355-360. DOI: 10.4028/www.scientific.net/AMM.248.355.
• 2016.
• 2022. Kul’chin Y.N., Gribova V.V., Timchenko V.A. et al. Methodology for Designing a Laser-Based Additive Process for the Formation of a Lattice Periodic Structure on the Surface of an Aluminum Alloy Plate // Autom Remote Control. 2022. 83, 138–152. https://doi.org/10.1134/S0005117922010106
• 2022. Kulchin Y.N. et al. (2022) A Concept of Cloud Knowledge Portal for Intelligent Decision Support in Additive Lattice Structure Formation from Aluminum Powder. In: Hu Z., Wang B., Petoukhov S., He M. (eds) Advances in Artificial Systems for Power Engineering II. AIPE 2021. Lecture Notes on Data Engineering and Communications Technologies. 2022. Vol 119. Pp. 207-218. Springer, Cham. https://doi.org/10.1007/978-3-030-97064-2_20.
• 2015. Maxim Anop, Evgenii Murashkin, Vladislav Mikhalichuk, and Marina Polonik, On Optimum Pressure Computing by Prescribed Displacements in Elastic-Creep Material. Finite Deformations, Published in Lecture Notes in Engineering and Computer Science (2015/07) Vol. 2218; no. 1; pp. 1243-1246.
• 2016. M. Anop, E.V. Murashkin, M.V. Polonik, On Zero-Order Optimization in Problem of the Pressure Computing in Finite Elastic-Creep Deformations, Key Engineering Materials. Vol. 685, pp. 300-304, Mar. 2016. doi:10.4028/www.scientific.net/KEM.685.300
• 2013. Krupskiy R.F., Murashkin E.V., Polonik M.V., Rogachev E.E., Dudko O.V. Mechanisms for reducing residual stresses in the metal girders with their thermomechanical processing // Bulletin of the Chuvash State Pedagogical University named IY Yakovlev. Series: Mechanics limit state. 2013. Vol. 2 (16). P. 82–89
• 2013. M.V. Polonik, E.V. Murashkin, Formation of the Stress Field in the Vicinity of a Single Defect under Shock (Impulse) Loading, Advanced Materials Research, 774-776 (2013) 1116-1121. DOI: 10.4028/www.scientific.net/AMR.774-776.111.
• 2017. Yatsko, D.S., Polonik, M.V., Dudko, O.V. Optimization of the fiber laser parameters for local high-temperature impact on metal // Proc. SPIE, 10176, 2017, Asia-Pacific Conference on Fundamental Problems of Opto- and Microelectronics; Khabarovsk; Russian Federation; 11 October 2016 through; Code 127505; doi: 10.1117/12.2268241
• 2014.
• 2011.
• 2014. E. E. Rogachev, M. V. Polonik, O. V. Dudko, E. V. Murashkin, "Numerical Modeling of Forming a Preform under High Temperature Creep", Advanced Materials Research, Vol. 1040, pp. 898-902, Sep. 2014. DOI: 10.4028/www.scientific.net/AMR.1040.898.
• 2016.
• 2016. Marina V. Polonik, Olga V. Dudko. Selection of the Optimal Parameters of the Process for Thermal Laser Treatment of Metals for Creating the Molten Pool with a Required Depth // CEUR Workshop Proceedings 1623, 768-778 (2016).